Window & Glass Cleaners effectively requires the right tools and techniques to achieve streak-free, sparkling results. Here’s a step-by-step guide on the best way to clean windows:
What’s the best way to clean windows?
Tools and Materials:
- Window cleaning solution (you can make your own using water, white vinegar, and a small amount of dish soap)
- A bucket
- Lint-free or microfiber cloths
- Window scrubber or a soft, non-abrasive sponge
- A ladder (if needed for high windows)
- Rubber gloves (optional)
- Prepare the Cleaning Solution:
- Mix your window cleaning solution by combining water, white vinegar (about 1/4 cup per gallon of water), and a small amount of dish soap in a bucket. Alternatively, you can use a commercial window cleaner Like Evans Vanodine Clear 750ml Trigger & refill with a 5ltr.
- Remove Dust and Debris:
- Before applying the cleaning solution, use a dry cloth or a duster to remove any loose dust, cobwebs, or debris from the window frame and sill.
- Apply the Cleaning Solution:
- Dip your window scrubber or sponge into the cleaning solution, then squeeze out excess liquid to avoid excessive drips.
- Starting from the top corner, apply the solution to the window surface, working your way down in a vertical motion. This helps prevent streaks.
- Scrub Gently:
- Use your scrubber or sponge to gently scrub the entire window surface. Pay extra attention to any spots or stains.
- Squeegee Technique:
- Starting at the top of the window, pull the squeegee down in a straight, horizontal motion, wiping the blade with a clean, lint-free cloth after each pass.
- Overlap each pass slightly to ensure you don’t miss any spots.
- Continue this process until you’ve squeegeed the entire window.
- Wipe Edges and Sills:
- Use a dry lint-free cloth to wipe any remaining moisture from the edges of the window, including the sill and frame.
- Check for Streaks:
- Inspect the window for streaks or spots. If you notice any, reapply the squeegee to those areas.
- Repeat on the Other Side (if applicable):
- If you’re cleaning windows with multiple panes (e.g., double-hung windows), repeat the cleaning process on the other side.
- Final Inspection:
- Stand back and check the window from both inside and outside to ensure it’s streak-free and clean. Touch up any remaining spots if necessary.
- Clean Window Hardware:
- If your windows have hardware, such as locks or handles, use a cloth dampened with the cleaning solution to wipe them clean.
- Dispose of Cleaning Solution Properly:
- Dispose of any leftover cleaning solution according to local regulations.
By following these steps and using the right tools and cleaning solution, you can achieve clean, streak-free windows that let in plenty of natural light and offer a clear view of the outside.
Here are 15 common window cleaning mistakes to avoid?
Avoiding common window cleaning mistakes is essential to achieve a streak-free and spotless result. Here are some common window cleaning mistakes to be aware of and avoid:
- Using Newspaper: While it’s a common myth that newspaper leaves windows streak-free, it can actually leave ink residue on the glass and may not be as effective as lint-free cloths or microfiber towels.
- Cleaning on a Sunny Day: Cleaning windows in direct sunlight can cause the cleaning solution to dry too quickly, leading to streaks. Choose a cloudy day or clean windows in the morning or evening when the sun is less intense.
- Not Dusting First: Failing to remove dust, cobwebs, and debris from the window frame and sill before applying cleaning solution can result in streaks and make the cleaning process less effective.
- Using Too Much Cleaning Solution: Using excessive cleaning solution can leave behind residue on the glass. Follow the recommended dilution ratios or guidelines on the cleaning product label.
- Not Rinsing Properly: Failing to rinse the window thoroughly after scrubbing can lead to streaks and soap residue. Ensure that you remove all cleaning solution from the glass.
- Using Dirty Tools: Dirty or worn-out squeegees, scrubbers, or cloths can leave streaks or transfer dirt back onto the glass. Keep your cleaning tools clean and in good condition.
- Scrubbing Too Hard: Aggressively scrubbing the glass can scratch the surface or damage window tinting. Use gentle, even pressure when scrubbing.
- Neglecting Window Frames and Sills: Cleaning only the glass and ignoring the frames and sills can result in an incomplete job. Be sure to clean these areas as well.
- Not Using Proper Ladder Safety: When cleaning high windows, using a ladder improperly or without proper safety precautions can lead to accidents. Always follow ladder safety guidelines.
- Skipping the Final Inspection: Neglecting to thoroughly inspect the window for streaks or missed spots before finishing the job can lead to unsatisfactory results.
- Ignoring Weather Conditions: Attempting to clean windows in windy or rainy conditions can lead to complications and streaks on the glass. Choose a calm day for outdoor window cleaning with our Window & Glass Cleaners.
- Using Ammonia-Based Cleaners on Tinted Windows: Ammonia-based cleaners can damage window tinting. Use a mild, non-ammonia-based cleaner on tinted windows.
- Using Harsh Chemicals on Specialty Glass: Specialty glass, like frosted or patterned glass, may be sensitive to certain chemicals. Consult the manufacturer’s recommendations for cleaning.
- Not Protecting Flooring or Furniture: When cleaning indoor windows, failing to protect flooring or furniture beneath the window can result in water or cleaning solution damage.
- Overlooking Safety Gear: If working with strong cleaning solutions or on high windows, consider wearing rubber gloves and safety goggles to protect your skin and eyes.
By avoiding these common window cleaning mistakes, you can achieve cleaner, streak-free windows and maintain a clear view both inside and outside your home or building. We have a comprehensive range of Window & Glass Cleaners for you to choose from.